Description
Designed primarily for those who run a short tri lug barrel with longer forearm to tuck a suppressor and wish to shoot non suppressed without compromising safety or changing hand guards. Attaches just like any spring loaded tri lug equipped suppressor
I have redesigned the base and all flat cones will now have a heat treated 7075 base that is then hard anodized. This should increase longevity.
Cones can now be ordered with either the 1.15 or 1.5″ base
Finish is Matte Black. Unfortunately the anodizer screwed up the color on this last round so there is a bit of difference between the base and cone itself as seen in the pics. Won’t be very noticeable once it is fired a few times but wanted to call it out,
If you have questions or wish to share information and have Facebook you can join this group HERE
These pieces are are all modular allowing the use of any forward section with the other components to make a complete unit.
Constructed of hard anodized aluminum body to reduce weight with a hardened steel insert. These flash cones are spring loaded and attach with a push and turn just like tri lug silencers. I have only used these in 9mm as such it is the only caliber that I sell them for. I do not rate these for .300 BLK. 1.5″ will not work on most mp5 or close, the sight base will interfere with installation. 1.15 does work on mp5 and clones
There is no additional cost for shipping it is included in the price of all listed parts. Insurance is optional and separate, there is a box at the bottom of the checkout page where you can accept or opt out of the insurance. ILWT cannot be responsible for lost or mishandled shipments once they are dropped to USPS. If you checkout without requesting insurance your item will be sent with only the amount afforded by USPS for your particular shipment which may not be anything for small items and up to $100.00 for some priority packages.Insurance will not let me file a claim if it is showing delivered so please make sure you put in the proper address or desire signature confirmation for an extra fee. By placing the order you acknowledge and accept this.
There are no refunds for installed, marred or otherwise damaged parts unless you are aiming a defect.
Additional information
| Weight | 5 oz |
|---|---|
| Configuration | 4.25" 1.15 od, 5.25" 1.15 od, 3.75" 1.5 od, 5.5" 1.5 od, 6.75" 1.5 od, 4 3/4" 1.5 OD |
3 reviews for TRI LUG FLASH CONE
Only logged in customers who have purchased this product may leave a review.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.Barrels may only be returned if they are unused and marked as returnable in description due to insurance and liability restrictions. If used or labelled as non returnable then repair/replacement only apply for function issues. .
- Only items that have been produced by us.Items manufactured by others will need to be addressed by the manufacturer
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Contact us for returns and information prior to shipping.Related Products
We were asked to bring this back so we obliged. This block is very helpful when removing the barrel retaining and detent pins. This locks...
$60.00 – $75.00
Select options
This product has multiple variants. The options may be chosen on the product page
High quality rings to replace your worn/damaged rings on your gas piston/tappet. Great for spare, comes in a 9 pack good for three full replacements....
$12.00
Add to cart
Drop in barrel assembly for the CZ Scorpion Pistol, Carbine
$225.00 – $285.00
Select options
This product has multiple variants. The options may be chosen on the product page
Replacement part for your worn/damaged ring that is designed for your gas plug/valve. This will work with factory or our replacement plugs. Perfect for spares...
$14.00
Add to cart
No restriction gas plug for the mpx platform similar to what the new Gen II MPX’s are shipping from the factory with There is no...
$40.00
Add to cart
Use the drop down to choose Gen I, II/III or other available configurations including braided fp spring Our Gen II/III firing pins will NOT work in...
$8.00 – $50.00
Select options
This product has multiple variants. The options may be chosen on the product page
Shock resistant steel heat treated, peened and blued (picture shows unfinished part, production parts will be blue). Factory units shear often great to have replacements...
$26.00
Add to cart
ILWT Muzzle-Thread Protector – 1/2-28 internal Threads – Melonite Finish -.750 Thread depth – 1.00″ OAL -.625″ Outer Diameter at shoulder – Knurled for easy...
$15.00 – $20.00
Select options
This product has multiple variants. The options may be chosen on the product page
Be aware their are two different screw head diameters on the mpx. Gen I and early Gen II use a .357 diameter head while later...
$16.00
Select options
This product has multiple variants. The options may be chosen on the product page
Gas plugs in restricted configuration (allows to to you restrict the gas port). These are great to have some flexibility with running different types of ammunition...
$46.00 – $75.00
Select options
This product has multiple variants. The options may be chosen on the product page
Shop, Parts for Scorpion EVO and 3+, Parts for MPX, 3-Lug Adapters & Muzzle Devices, Mac 10 Mac 11 Barrels
griffin tri lug mounts may not work with this tri lug assembly. other manufacturer products that are in spec are not an issue. I have...
$55.00 – $70.00
Select options
This product has multiple variants. The options may be chosen on the product page
Two line text engraving on barrel. Please include text you would like engraved in the notes section of the order. If you are wanting to...
$10.00
Add to cart
Newer griffin tri lug mounts may not work with this tri lug assembly. Older Griffin and all other manufacturer products that are in spec are...
$65.00
Select options
This product has multiple variants. The options may be chosen on the product page
Drop in barrel assembly for CZ Scorpion Evo 3 pistols, carbines
$290.00
Select options
This product has multiple variants. The options may be chosen on the product page
kschwan1
Just received one in for my MPX. the fit and finish are great. Now I can install under the hand guard on my 4.5″ ILWT barrel for when I don’t want to shoot the suppressor
Quality part
mikem630
This is exactly what I was looking for to be able to shoot my MPXk with an under hand guard mounted suppressor when the suppressor is removed. Fit and finish is excellent.
dakgreenmtnboy
Review for TRI LUG FLASH CONE
★ ★ ★ ★ ★
Noah Isaac
Functions well and looks great on my Scorpions S1
Zak Taylor
Review for TRI LUG FLASH CONE
★ ★ ★ ★ ★
Zak Taylor
Also wanted to mention, the extended 3-lugs are a life saver if you need additional length to clear your handguard when mounting a suppressor. If you own a factory CZ Scorpion Micro S2 (non conversion kit) and want to use anything larger than an Omega 9k then this product is a must. Consider these five stars for the extended 3-lugs.