Description
7.4 Tri Lug is out of stock and I will most likely not make anymore in the future. The 6.5 Tri Lug will work on the full size Bog but the Tri Lug will be unaccessible and hidden under the receiver allowing only the use of the 1/2-28 threads which will protrude past the upper receiver
The 7.4″ fit the full size stribog, all models, and place the suppressor very close to the upper with good clearance for a variety of cans.
Barrel wrenches available, the 1/8″ works on all models, the 1/4″ only works on newer firearmshere
These barrels fit all models of the Stribog.
6.3″ Barrels now available. These barrels are 1/2-28 tpi only and do not have a machined tri lug. the barrel diameter is increased to .625 to allow proper shoulder for suppressor/accessory installation
Barrels:
– Made from 41v50 steel.
– 1/10 button rifling.
– 6.3″ OAL (Tri Lug barrels are longer to allow clearance for suppressor mounting)
– Propriety chamber dimensions for accuracy
– All 1/2-28 threads are C2A ring-gauged for precise QC, and correct interfacing with 1/2-28 (C2A industry-standard) suppressors.
– Hard Melonite finish for durability & longevity.
Suppressor attachment points:
– 1/2-28 muzzle threads, single-point threaded, concentric with bore.
– Thread protector included.
We use the tightest of tolerances and highest quality control.
All barrels are proudly made in the USA and engraved with ILWT.
Installation of parts by qualified gunsmith recommended
More info here
I do not accept returns on barrels due to liability and cannot sell them as new once they are shipped out and returned. If there is a function issue obviously I will make that right if it is due to my product.There is no additional cost for shipping it is included in the price of all listed parts.
There is no additional cost for shipping it is included in the price of all listed parts. Insurance is optional and separate, there is a box at the bottom of the checkout page where you can accept or opt out of the insurance. ILWT cannot be responsible for lost or mishandled shipments once they are dropped to USPS. If you checkout without requesting insurance your item will be sent with only the amount afforded by USPS for your particular shipment which may not be anything for small items and up to $100.00 for some priority packages. By placing the order you acknowledge and accept this.
DISCLAIMER: Grand Stribog is federally/internationally registered trademark of Grand Stribog.
Neither ILWT, LLC nor this website are affiliated in any manner with, or otherwise endorsed by, Grand Stribog or Global Ordinance.
The use of “Grand Stribog, SP9/SP9A1” on this page is merely to advertise the sale of “SP9” type barrels, parts, or components, manufactured by ILWT LLC.
Additional information
| Weight | 7.85 oz |
|---|---|
| Configuration | 6.3" 1/2-28 TPI Only, 6.5 Tri lug with 1/2-28 threads |
1 review for Barrels for Grand Stribog SP9/SP9A1/SPA3, 6.3″ 1/2-28 & 6.5 Tri Lug with 1/2-28 threads (Navy)
Only logged in customers who have purchased this product may leave a review.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.Barrels may only be returned if they are unused and marked as returnable in description due to insurance and liability restrictions. If used or labelled as non returnable then repair/replacement only apply for function issues. .
- Only items that have been produced by us.Items manufactured by others will need to be addressed by the manufacturer
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Contact us for returns and information prior to shipping.Related Products
Back in stock as of December 13, 2024 Add a Factory Sig MPX PCC 16″ hand guard for an extra $50.00 while supplies last with...
$40.00 – $695.00
Select options
This product has multiple variants. The options may be chosen on the product page
All recoil springs are sold in a set of two springs red= -25% blue= -13% Bare=Standard factory rate white= =20% yellow= +40% There is no...
$25.00 – $110.00
Select options
This product has multiple variants. The options may be chosen on the product page
3-Lug Adapters & Muzzle Devices, Mac 10 Mac 11 Barrels, Parts for MPX, Parts for Scorpion EVO and 3+, Shop
griffin tri lug mounts may not work with this tri lug assembly. other manufacturer products that are in spec are not an issue. I have...
$55.00 – $70.00
Select options
This product has multiple variants. The options may be chosen on the product page
Back in stock as of 04/12/2025 The barrel is 7″ from closed chamber to muzzle, the way every barrel I make is measured, not 7″...
$40.00 – $575.00
Select options
This product has multiple variants. The options may be chosen on the product page
Short adjustable plug available with new barrel order. Custom laser engraving available on barrels by request for an additional charge For barrels equipped with the...
$40.00 – $520.00
Select options
This product has multiple variants. The options may be chosen on the product page
These are NOT Chambered in 9mm they are chambered in 22tcm9r. Please read about the cartridge before ordering. Gen-2/3 MPX-type Drop-in Barrel & Gas Block...
$500.00
Select options
This product has multiple variants. The options may be chosen on the product page
ILWT Muzzle-Thread Protector – 1/2-28 internal Threads – Melonite Finish -.750 Thread depth – 1.00″ OAL -.625″ Outer Diameter at shoulder – Knurled for easy...
$15.00 – $20.00
Select options
This product has multiple variants. The options may be chosen on the product page
Replacement or spare hardened and black oxide barrel retaining nuts for the Stribog. These will fit all models but have the larger slots of the...
$15.00
Select options
This product has multiple variants. The options may be chosen on the product page
Non-Threaded direct replacement barrel for The Classic Colt 1903 .32 Pocket Hammerless Model M (Bushing model). 4140 heat-treated steel. Available in Blued finish. Perfect to...
$210.00
Add to cart
Custom Threaded Barrel for The Classic Colt 1903 .32 Pocket Hammerless Model M (Non-bushing model). Our threaded barrels allow you to run a 1/2-28 tpi suppressor...
$210.00
Read more
Machined aluminum or delrin vice block to secure your mpx lower while doing maintenance, trigger, barrel swaps, etc. Only available in black hard coat or bare...
$40.00 – $55.00
Select options
This product has multiple variants. The options may be chosen on the product page
Easily damaged during disassembly and cleaning. Package of 4 Installation of parts by qualified gunsmith recommended There is no additional cost for shipping it is...
$16.00
Add to cart
Great upgrade to replace factory units. The factory retainer is often lost during disassembly, this eliminates in the clip search and makes takedown and reassembly...
$20.00
Select options
This product has multiple variants. The options may be chosen on the product page
Proper torx screws for the Older MPX Ejector. These are often buggered or broken during removal.Nice to have as spares. Three in each package. These...
$10.00 – $15.00
Select options
This product has multiple variants. The options may be chosen on the product page
Clayton Woodthomas
This barrel is great! the machine quality is superb and mounts muzzle devices and cans nice and close to the receiver. The original Stribog barrel was accurate however this barrel is more accurate. I couldn’t be happier with this barrel.