Description
Be aware their are two different screw head diameters on the mpx. Gen I and early Gen II use a .357 diameter head while later Gen II such as PCC and Copperhead use ~.340. If you have the one piece nut with bar that fits in the left side of receiver you will most likely require the ~.340 screws, if you have the two independent nuts then you will most likely require the .357 screws. Please verify which set you need my measuring the recessed opening on your receiver. For the near future the lower band on the .340 screws will be bare metal as I have to turn them down from the .357 diameter until I can run more. This is not noticeable when installed and does not have any affect on function.
Factory style barrel screws These are Grade 8 parts. Sold in sets of two Great when used in conjunction with the Torque Key
If you have questions or wish to share information and have Facebook you can join this group HERE
There is no additional cost for shipping it is included in the price of all listed parts. Insurance is optional and separate, there is a box at the bottom of the checkout page where you can accept or opt out of the insurance. ILWT cannot be responsible for lost or mishandled shipments once they are dropped to USPS. If you checkout without requesting insurance your item will be sent with only the amount afforded by USPS for your particular shipment which may not be anything for small items and up to $100.00 for some priority packages. By placing the order you acknowledge and accept this.
Additional information
| Weight | N/A |
|---|---|
| Head Diameter | .357, .340 |
1 review for MPX barrel screws
Only logged in customers who have purchased this product may leave a review.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.Barrels may only be returned if they are unused and marked as returnable in description due to insurance and liability restrictions. If used or labelled as non returnable then repair/replacement only apply for function issues. .
- Only items that have been produced by us.Items manufactured by others will need to be addressed by the manufacturer
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Contact us for returns and information prior to shipping.Related Products
Replacement for the MPX Extractor Springs, pack of 5. “Donuts” also come in a pkg of 5 Also available on the drop down menu is...
$10.00 – $30.00
Select options
This product has multiple variants. The options may be chosen on the product page
3-Lug Adapters & Muzzle Devices, Mac 10 Mac 11 Barrels, Parts for MPX, Parts for Scorpion EVO and 3+, Shop
griffin tri lug mounts may not work with this tri lug assembly. other manufacturer products that are in spec are not an issue. I have...
$55.00 – $70.00
Select options
This product has multiple variants. The options may be chosen on the product page
13.5 x 1 LH specifically made for MPX Type Tapered Barrels now available in drop down. Does not require taper ring! Newer griffin tri lug...
$46.00 – $65.00
Select options
This product has multiple variants. The options may be chosen on the product page
Machined 4140 Barrel nut for the PCC, Copperhead, Micro, etc with single nut design (Late Gen II and the others listed that some refer to...
$22.00 – $32.00
Select options
This product has multiple variants. The options may be chosen on the product page
All recoil springs are sold in a set of two springs blue= -13% yellow= =20% There is no additional cost for shipping it is included...
$25.00
Select options
This product has multiple variants. The options may be chosen on the product page
Parts kit does not come with barrel screws and nuts, or springs (unless ordered that way via drop down)pic is for reference only. Exact contents...
$145.00 – $230.00
Select options
This product has multiple variants. The options may be chosen on the product page
We can open the gas port on your factory barrel assembly an extension for more reliable function. Please place in comments size desired, .052, .054,...
$60.00 – $90.00
Select options
This product has multiple variants. The options may be chosen on the product page
Back in stock as of December 13, 2024 The barrel is 7″ from closed chamber to muzzle, the way every barrel I make is measured,...
$40.00 – $575.00
Select options
This product has multiple variants. The options may be chosen on the product page
Replacement high quality replacement dust cover doors for the MPX Platform. The factory piece is plastic and not befitting a firearm in this price range...
$40.00
Select options
This product has multiple variants. The options may be chosen on the product page
Shock resistant steel heat treated, peened and blued (picture shows unfinished part, production parts will be blue). Factory units shear often great to have replacements...
$26.00
Add to cart
Gas plugs in restricted configuration (allows to to you restrict the gas port). These are great to have some flexibility with running different types of ammunition...
$46.00 – $75.00
Select options
This product has multiple variants. The options may be chosen on the product page
Brass brushes to clean MPX Piston chambers. These have a flexible rod for ease and access without damaging the barrel finish. Come in package of...
$20.00
Add to cart
Proper torx screws for the Older MPX Ejector. These are often buggered or broken during removal.Nice to have as spares. Three in each package. These...
$10.00 – $15.00
Select options
This product has multiple variants. The options may be chosen on the product page
Please order correct tappet from drop down. If you have one of our blocks with a #2 on the left side of gas chamber area...
$33.00 – $55.00
Select options
This product has multiple variants. The options may be chosen on the product page
Add Ion Bond to the barrel extension of any MPX barrel order. The slick, low-friction DLC coating gives firearms extra dry lubrication properties for moving...
$40.00
Add to cart
imcdog4u
Save yourself the hassle someday of one of the OEM screws snapping, Buy these and never worry about them again. Great quality and fit perfectly.